Toyota pmn Manuel d'utilisateur télécharger pdf (Page 49)

15. Installation engine compartment lower

1. APPLY LIQUID GASKET TO OIL PAN.

(a) Apply the liquid gasket onto the clean sump surface.

NOTICE: Liquid gasket 08826-00080

2. INSTALL OIL PAN.

(a) Within 3 minutes after applying the liquid gasket install

the oil-sump onto the engine using the 14 bolts and 2

nuts.

R: Bolt (14 pcs.)

R: Nut (2 pcs.)

(b) Tighten the bolts and nuts carefully first with 5 Nm and

after with the final torque.

Torque: 9 Nm

3. INSTALL OIL PRESSURE SWITCH EXTENSION.

(a) Remove oil pressure switch.Use Special tool (SST

09816-30010)

R: Oil pressure switch

(b) Install the oil-pressure switch extension into the oil

filter housing using Loctite 243.

K: Extension(15-2)

Torque: 13 Nm

U: Oil filter

(d) Install a new oil filter.

K: Oil filter (26-7)

4. INSTALL OIL PRESSURE SWITCH EXTENSION

BOLT.

(a) Route the oil pressure tube towards the adapter.

(b) Insert the hollow bolt with the 2 copper seal rings into

the adapter using Loctite 243.

NOTICE: When applying the correct torque

onto the hollow-bolt ensure that the

adapter is secured against further

rotation and that the pressure tube is

pointing into the correct direction.

K: Hollow-bolt (15-1)

K: Seal rings (2 pcs.) (15-3)

Torque: 20 Nm

R14x

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 63 64

Pas de commentaire

Toyota pmn Manuel d'utilisateur Page 49